Phone: +49 9832 - 68 68 50

    Chimney relining

    We offer you the best solution for any application!

     

     

    If the chimney is fine then everything is fine!

    If the existing house-chimney is showing signs of wear and tear due to its age or no longer fulfill the requirements of a modern heating system, then a restoration of the chimney is necessary.


    Usage of a modern heating system in combination with an old chimney leads to soot in the chimney as its cross section is too big for the low temperature flue. The acid condensate corrodes the chimney stones/bricks as they, too, are not made to withstand the side effects of modern flue systems.


    A restoration of the chimney system is made by introduction of exhaust pipes made out of stainless steel or polypropylene from the chimney head. The choice of the flue system depends on the type of appliance, whoose sizing  should be analyzed by an expert.


    Depending on the application you can choose the suitable chimney kit that Jeremias has to offer.

    EW-ECO

    Modular single walled chimneys

    Economical modular metallic single wall chimney for gas and smoke exhaust of combustion products

    EW-FU

    Flue system made out of stainless steel


    The classic one for relining: single wall stainless steel chimney for modernizing and reducing the cross-sectional area of existing chimneys, connection pipes and for the ventilation.

    EW-SILVER

    Acid resistant stainless steel flue system

    Single wall acid resistant stainless steel chimney for reduced cross-sectional area of chimneys for the adaptation to modern fireplaces (oil/gas/chip/split logs and wood pellets according to DIN 51731, for dry and moist mode of operation.

    EW-AL-BI

    Pressure-tight flue system made out of stainless steel

    Single wall, over pressure stainless steel chimney system with inner gaskets for condensing boilers.

    EW-LINE FLEX FU

    Flexible stainless steel flue system


    Single wall flexible stainless steel exhaust system for relining of chimneys with offset.

    EW-LINE FLEX AL

    Pressure-tight flexible flue system made out of stainless steel

    Single wall, over pressure stainless steel chimney system with inner gaskets for relining of chimneys with offset.

    EW-KL

    Conically sealing flue system made out of stainless steel


    Single wall flue system with conical connection (no gasket needed!) for all standard fireplaces and CHP

    EW-PPS

    Pressurized flue system made out of plastic


    Single wall, high pressure flue system made of plastic (PP)

    EW-PP FLEX

    Flexible pressurized flue system made out of plastic


    Single wall, flexible, high pressure flue system made of plastic (PP)

    25 years warranty!