Stoves that work with solid fuels like wood or pellets, produce a languorous heat, which is perfect for heating your room. The exhaust gas that are produced during the burning, are lead through a stove pipe to the chimney or exhaust system.
The combustion process is happening during low pressure, which means that the exhaust gas has to leave through the chimney draught. For this our standard stovepipe FERRO-LUX or the isolated variant ISO-LINE is suitable for a reduced distance to combustible components.
For pellet powered stoves we developed a special exhaust system PELLET LINE. The factory-fitted seal prevents the escape of particle matter during deflagration. The maximum flue gas temperature must not exceed 200°C.
If the system works room air independent then we offer you suitable air supply systems (single/double walled).
Stove pipe made out of sheet steel for the connection to wood stoves and for the usage in the living area and in the field of vision, dry operation mode
Double wall stove pipe made out of stainless steel for the connection to wood stoves and the usage in the living area and field of vision, dry operation mode
Stove pipe made out of stainless steel with inner gasket for the connection to pellet stoves. Usage in the living area and field of vision.
The classic one for relining: single wall stainless steel chimney for modernizing and reducing the cross-sectional area of existing chimneys, connection pipes and for the ventilation.
Single wall acid resistant stainless steel chimney for reduced cross-sectional area of chimneys for the adaptation to modern fireplaces (oil/gas/chip/split logs and wood pellets according to DIN 51731, for dry and moist mode of operation.
Single wall flexible stainless steel exhaust system for relining of chimneys with offset.
Single wall flue system with conical connection (no gasket needed!) for all standard fireplaces and CHP
Reasonable alternative to classic DWFU system : double wall stainless steel chimney for all low pressure standard fireplaces. Works in both dry or moist conditions
The classical : double wall stainless steel chimney for all standard fireplaces working with low pressure
Double wall acid-resistant stainless steel chimney to connect fireplaces for fuel types : oil, gas, wood chips, split logs and wood pellets according to DIN 51731, for dry and moist usage
The allrounder: pressure tight double-wall stainless steel chimney with conical sealing connection
The Plus-X-Award winner: DW-VISION, the double wall stainless steel chimney, can be used without any clamping fittings which makes a smooth chimney column possible
Double-wall stainless steel chminey with acid-resistant ceramic inner pipe, ideal for solid fuel in a wet operation mode
